home / Sie / Benzinmotor /
/

Luftgekühlter 170F-Benzinmotor

170F|7.0 HP|210cc|1-Zylinder|OHV
Warum 1
tuv
NPS
2 Jahre Garantie
EP 1
  • New technology, super silent
  • Lange Laufzeit
  • Economic, reliable, durable
  • CE,ISO9001 Standard.
  • Hohe Drehzahl
  • ruhiger Lauf mit minimaler Vibration
  • Geringes Gewicht, niedrige Kosten
keine Marke30 setzt
OEM-Standard50 setzt
OEM-Sonderangebot100 setzt

170F-Spezifikationen

Motor- und Emissionsspezifikationen
MotormodellBS170F
TreibstoffartBenzin
Motordrehzahl3000/3600 U / min
Bohrung * Schlaganfall70*54/56 mm
Hubraum210cc
power of engine (hp)7.0HP
Kompressionsrate8.2:1
Motortyp1-Cylinder, Air-Cooled, 4-Stroke, Direct Injected, OHV
Motorölsorte#5W-40
Kraftstoffkapazität3.6L
Öl Kapazität0.6L
low oil shutdown/alertJa
RückstoßstartJa
ElektrostartOptional
fuel consumption radio≤395g/kW/h
ZündanlageTCI

BS170F is an air cooled petrol engine. The purpose of 170F engine is to convert internal energy into kinetic energy. It uses gasoline as fuel, which is pumped through a jet system into the cylinder and then makes it inflate. It has various advantages such as high speed, simple structure, light quality, low cost, stable operation convenient maintenance, etc.

The air-cooled system is efficient. The small size and compact structure. It is portable and movable. It has low noise level and vibration, large stable power output. It is easy to pull and quick to start. Low fuel consumption makes it economical. The engine is also suitable for generator, water pump, compressor, mini-tiller, high pressure washer

The following points are noted while using 170F air cooled petrol engine:

  • During the off-job period after the engine overhaul, strict operation rules and regulations on load reduction and deceleration should be implemented;
  • Keep the correct ignition timing to avoid setting the ignition timing too early and causing the engine to burst and overheat;
  • Ensure sufficient oil that meets the original factory specifications. Check the oil pressure frequently, and change the oil according to the requirements of the departure period;
  • Add enough cooling water and always check the cooling water and water temperature.

BISON 170F air cooled petrol engine provides engine dealers with several advantages:

  • Supply capacity: with the ability to produce 10,000 sets per month, dealers don’t have to worry about inventory shortages and shipment delays.
  • Certification: BISON engines have certificates such as CE and ISO, ensuring that the generator meets necessary safety, health and environmental standards, increasing the credibility for dealers and customers.
  • Warranty: BISON offers one-year warranty and any issues your customers may have during the warranty period will be resolved, thereby increasing trust in your brand.
  • Customization options: BISON offers customization options such as recoil start, electric start and color changes. This flexibility allows dealers to meet a wider range of customer needs, thereby expanding market reach and increasing sales potential.
  • By leveraging these strengths, engine dealers can strengthen their market competitiveness, attract more customers.If you want to get more information about 170F air cooled petrol engine, you can contact us directly!
170f air cooled petrol engine details 4
170f air cooled petrol engine details 2
170f air cooled petrol engine details
170f air cooled petrol engine details 3
170f air cooled petrol engine details 5
170f air cooled petrol engine details 6

Unsere Motorteile

Motorpleuel

Pleuel des Motors

Die mechanische Festigkeit hängt von der Dichte des ADC12-Aluminiumgussaluminiums ab, und die Gewichtsüberwachung kann die Konsistenz der strukturellen Zugfestigkeit und der Verarbeitung von CPK gewährleisten

Motorkolben

Motorkolben

Verwenden Sie Z109-Material, um die Verschleißfestigkeit zu erhöhen und thermische Verformung zu reduzieren, um das Gewicht des Kolbens und die Genauigkeit der Bearbeitung sicherzustellen

Motorgehäuse

Motorgehäuse

Durch den Einsatz hochpräziser Vorrichtungen, Bearbeitungszentrumsausrüstung zur Gewährleistung von Präzision und hoher Materialstärke kann die BISON-Box den Haltbarkeitstest für 125 Stunden bestehen und Emissionsnormen erfüllen

Einlass- und Auslassventile des Motors

Einlass- und Auslassventile

Das Ventil besteht aus 40Cr10SiMo-Material. Das Auslassventil hält hohen Verbrennungstemperaturen stand. Wenn die Last hoch ist oder die Verbrennungsbedingungen anormal sind, wird die Temperaturgrenze nicht beeinflusst, wenn die Temperaturgrenze unter 700–780 °C liegt.

Motortest

Bison-Motortests

Speziell für Motortests und ausgestattet mit Qualitätskontrolle für Stichprobentests. BISON überprüft und bestätigt die Leistung und Zuverlässigkeit jeder Motorencharge, um mögliche Produktausfälle zu vermeiden.

Gewährleisten Sie die Dichtleistung der Struktur und des Einbaus des Kurbelgehäusekörpers. Durch professionelle Instrumententests können schlechte Dichtungsfehler bei Installation und Material festgestellt werden, um Öllecks und Öllecks des Motors zu vermeiden und die tatsächliche Leistungseffizienz sicherzustellen.

Die Lastausgangsstabilität des Stroms kann online bestätigt werden und die Konfiguration kann nach der Stabilisierung gesperrt werden, um eine hohe Produktkonsistenz sicherzustellen

Professionelle Techniker mit 15–20 Jahren Erfahrung

Leistungsinbetriebnahme

Leistungsinbetriebnahme

Motormontage

Motormontage

Kunstwerk qa

Kunstwerk-Qualitätssicherung

vollständige Inspektion

vollständige Inspektion

Motorspezifische Inspektion

Motorspezifische Inspektion

Teile Montage

Teile Montage

Kernbaugruppe

Kernbaugruppe

spezialisierte Energieinspektion

spezialisierte Energieinspektion

QC-System

During the production, BISON care about the quality for each 170F air cooled petrol engine, that’s why we strictly follow the step of our QC system. Every product will be well test during the production line, we separate the faulty one to special area-faulty zone, where the place will collect faulty product and send to repair.

ERP-System

Durch die vollständige Nutzung des ERP-Systems laufen alle Schritte nach Eingang Ihrer Bestellung methodisch ab, was unsere Arbeitseffizienz verbessert und unsere Fehlerquote reduziert. Und es gibt unseren treuen Kunden mehr Vertrauen.

Produktionssystem

From the beginning of the product production, BISON skilled operate equipment to manufacture high level quality 170F air cooled petrol engine. All steps by our own workers.

Garantiehinweise

Die Mitarbeiter der Wartungsdienstabteilung müssen kontinuierlich lernen, ihr eigenes technisches Niveau verbessern und verbessern, Dienstleistungen für Kunden erbringen und sich strikt an das entsprechende Unternehmenssystem und den Verhaltenskodex halten, um sicherzustellen, dass sie „freundlich, enthusiastisch und reaktionsschnell“ sind. Wir werden anbieten Der technische Support per Telefonanruf oder Internet, wenn der Kunde dies wünscht.

Wenn Transport-, Installations- oder Fehlbedienungsprobleme zur Beschädigung eines Teils des Geräts führen, besteht keine Garantie, aber wir bieten dem Kunden das Teil zu einem günstigen Preis an.

Teile für Benzinmotoren

Rabattiertes Zubehör

24 Stunden online, 5 Minuten Antwort

24 Stunden online, 5 Minuten Antwort

Ingenieur vor Ort Service

Ingenieurservice vor Ort

Verpackung und Versand

Verpackungsdetails: brauner stabiler Karton, Motor ist durch Polybeutel geschützt, aus Holz, 1 Stück/Karton. Lieferzeit: Versand innerhalb von 25 Tagen nach Zahlungseingang.

Sprechen Sie mit einem BISON-Verkaufsleiter

Kontaktieren Sie uns noch heute für eine kompetente Beratung.

unsere Produkte

168f 1 4 stroke petrol engine

168F-1 4 stroke petrol engine

Benzinmotor 2

EY20 5hp petrol motor

Hochgeschwindigkeits-Benzinmotor

Hochgeschwindigkeits-Benzinmotor

Benzin-Verbrennungsmotor

2.5 PS starker 152F-Benzinverbrennungsmotor

Kannst du nicht genug bekommen?

Abonnieren Sie exklusive Angebote und Updates zu Neuankömmlingen